Monday, October 01, 2007

LM311 - Voltage Comparator

The LM111, LM211 and LM311 are voltage comparators that have input currents nearly a thousand times lower than devices like the LM106 or LM710. They are also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic.

LM311 - Voltage Comparator

LM311 - Voltage Comparator

Both the inputs and the outputs of the LM111, LM211 or the LM311 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire ORed.
  • Operates from single 5V supply
  • Input current: 150 nA max. over temperature
  • Offset current: 20 nA max. over temperature
  • Differential input voltage range: ±30V
  • Power consumption: 135 mW at ±15V
Related Resources -

Voltage Comparator Information And Circuits

This page provides basic information about voltage comparator integrated circuits and is to act as reference material for other circuits. The circuits shown are based on the LM339 Quad Voltage Comparator chip or the LM393 Dual Voltage Comparator chip. These devices are functionally the same. The LM311 Voltage Comparator can be used for these applications as well but it also has a number of unique features.

Comparators and Schmitt Triggers

An LM311 in a comparator circuit is shown at the right, with the pin numbers for the connections. The open-collector output is at pin 7, and the ground for this transistor is at pin 1. It is shown pulled up to the logic voltage of +5 with a 1k resistor, which is typical. The output of the LM311 can sink 8 mA. A comparator's output is essentially binary, YES or NO.