EMA Design Automation

EMA Design Automation

From OrCAD and Cadence Allegro PCB design tools to custom IC design solutions, EMA has the range of products and depth of experience to meet the electronic design requirements.

Professional pre-sales consulting, system integration, post-sales support, environmental compliance assistance, and thorough design-methodology consulting

Mini-Circuits RF- IF Designers Guide

Mini-Circuits RF- IF Designers Guide

"Design, manufacturing, and distribution of RF, IF, and microwave components covering the DC to 20GHz band, for commercial, industrial, space, and military, including: WiMax, CATV, Cellular Wireless, RFID, Medical Equipment, Test Equipment, Receivers, Transmitters and Satellite applications."

Mini-Circuits Application Notes

Tanner EDA - Automate and Simplify Design

Cost Effective Design Automation, Analog/Mixed-Signal ICs, ASICs and MEMS. - @TannerEDA

Tanner EDA - Automate and Simplify Design

• Schematic Capture: S-Edit
• Simulation: T-Spice, W-Edit
• Physical Layout: L-Edit
• Verification: HiPer Verify
• Parasitic Layout Extraction

Tanner IC Work Flow

"Tanner Tools are fully-integrated solutions consisting of tools for schematic entry, circuit simulation, waveform probing, full-custom layout editing, placement and routing, netlist extraction, LVS and design rule checking (DRC) verification."

Cadence Design Systems and OrCAD

Cadence Design Systems and OrCAD

Cadence RF Design Methodology Kit enables customers to rapidly address wireless opportunities by addressing system-level, verification and IC parasitic challenges.

Cadence Functional Verification Kit for ARM offers a comprehensive verification solution specifically for engineers developing ARM processor-based designs.

OrCAD Capture - PSpice A/D

Cadence Tutorial for VLSI Design

This site contains a complete on-line tutorial for a typical bottom-up design flow using CADENCE Custom IC Design Tools (version 97A). The examples were generated using the HP 0.6 um CMOS14TB process technology files, prepared at North Carolina State University (NCSU) and made available through MOSIS.

• VTVT - VLSI Design: Cadence Tutorial
• Cadence Tutorials and Such
• Advanced Digital VLSI Design: VHDL

Labcenter Electronics - Proteus Design Suite

Labcenter Electronics - Proteus Design Suite

The Proteus Design Suite is wholly unique in offering the ability to co-simulate both high and low-level micro-controller code in the context of a mixed-mode SPICE circuit simulation. With this Virtual System Modelling facility, you can transform your product design cycle, reaping huge rewards in terms of reduced time to market and lower costs of development.

Co-simulation of microprocessor software within a mixed mode SPICE simulator.

• Available for PIC, 8051, AVR, HC11, ARM7/LPC2000 and Basic Stamp processors
• See your code interact with simulated hardware in real-time.
• Interactive peripheral models for displays, keypads, etc.
• Over 8000 analogue and digital device models.
• Extensive single step and debugging facilities including system wide diagnostics.
• Works with popular compilers and assemblers.

Bill O’Donnell – Tech Gizmo Builder

These are high tech jigs, fixtures and instrumentation/automation gizmos that bill built. Electrical gizmo builder for the UNLV Physics Dept.

Bill O'Donnell - Tech Gizmo Builder

These projects are advanced and not for a beginner student or newbie hobbyists. These pages are knowledgable and will help students and DIY enthusiasts understand more about Lasers, Precision Temperature Control and stepper motors among other things.

Auto Fill Circuit for Laser Cooling Loop - Ethernet Data Logging

Here is an automation solution with a ethernet usage. The code and diagrams are also there. This is something that covers many aspects of engineering in one project. Try such things out to learn, only after you have mastered the basics.

"The Ethernet connection is based on an XPORT form Lantronics. Basically it lets you use a serial port to send things over Ethernet. A PIC microcontroller with an A/D converter digitizes the pressure, the pressure set point, the high and low pressure alarm points and the supply voltage (since everything is ratio-metric). "

AVEVA - Engineering Software Provider

AVEVA - Engineering Software Provider

"AVEVA's unique object-centred technology uses 'objects' to represent real-world elements, such as valves, pumps or pipes."

Information Management solution and Integrated Engineering & Design tools.

AVEVA Instrumentation formerly Instrumentation Design Office (IDO)