Saturday, December 06, 2014

Safe and Sound - Product Safety

Product Safety
  • Product should not give even the lightest shock, Even metal parts on user side to be laminated.
  • High energy circuits never enters analog and digital circuit areas without Opto or other Isolation.
  • Gadgets, Furniture, Tools and Storage Units should not cause injury. Rounded Edges, Non Toxic.
Worker Safety
  • Helmet, Goggles and Face/Respiratory Mask when working with power tools/ abrasion and large objects.
  • Crepe Bandage, Neoprene Ankle/Knee/Thigh Support when pushing or pulling or Physical Exertion.
  • Waist/Back Support Belts and Straps to reinforce back/spine while doing Heavy Lifting or Movement.
  • Waistband Thick Belt or Traditional Sash helps Posture and prevents slipped disc or spinal injury.
  • When using a Knife, Sharp Tool, Pointed Tool or Drill; cut/bore away from your body or finger/leg not towards.
  • Use Long Riding Leather/Synthetic Boots when working in chemical plants and heavy industry.
  • Cross Ventilation and exhaust fans important if even little chemical fumes are generated in your work.
  • Soldering, plastic forming and even for some kinds of material processing. Good Ventilation or Masks needed.
Safe and Sound - Product Safety

Workshop Safety
  • Fire hazard and Air pollution in the workplace is the most important two dangers, Electricity is third.
  • Use Leather Boots when working with high voltage, also silicone flexible gloves or Latex Gloves.
My Recent Lessons -

I have long stopped using power tools as the injury is more in that. I have again started using small tools. Some notes.
Wear ear muffs when Noise present in surroundings to avoid distraction. When your own tools/work create too much noise, then also ear muffs protect ears, give some allowance/filter for audio feedback .
  • Cut away from you, not towards. Sharp tools and Power tools keep job at a distance. Watch for Splinters.
  • Both Legs and at least one hand insulated when working with High Voltage.
  • Use the right tool for the right job. Do not use cutting plair like a hammer.
  • Do not use Teeth, Legs etc. as tools. Only Iron and Steel should face the Job.

Blocks

80C51 Analog Analog-Design Analytical-Instrumentation Android Application-Notes-2 ASIC-Design ASIC-SOC-FPGA Bipolar-Transistors Capacitors Circuit-Archive Circuit-Design Circuit-Design-2 Communications Communications-Chips Component-Testing Computer-IC-Module Computer-Interfacing Control-Systems Design-Service Design-Service-2 Design-Service-3 Digital Discrete-Semiconductors DSP EDA EDA-2 EDA-3 EDA-4 EDA-5 Educational Educational-2 Electrical Electromechanical Embedded Embedded-2 Embedded-Applications Embedded-Systems-Tools Energy-Power Engineering-Services Engineering-Services-2 Engineering-Services-3 ESD-EMI-RFI Firmware Home-Automation Industrial-Automation IoT-WSN-M2M LED-Lighting Magazines Manufacturing-Services Materials-Nanotech Mechanical-3D-CAD Mechatronics Medical-Electronics MEMS Microcontroller Microelectronics Mixed Mixed-Semiconductor Mixed-Signal-Design Opamps Open-Hardware Optoelectronics Organizations-Associations Passive-Components PCB-Layout Photonics-Optics PIC Power-Devices Power-Electronics Power-Electronics-Design Process-Control Process-Control-2 Product-Safety Product-System-Design Projects Quality Reference Research-Institutes RF-Components RF-Design RF-Engineering-Services RF-Microwave RF-Semiconductor RF-Wireless-Networking Robotics Scientific-Software Semiconductors Sensors SMPS-Power-Supply Software-Code Spice-Simulation Standards Standards-2 Tech-Docs Tech-Media Technical-Computing Test-Measurement TM-Applications Training-Consulting Virtual-Instrumentation