Showing posts with label MEMS. Show all posts
Showing posts with label MEMS. Show all posts

Saturday, August 06, 2016

Analog Devices - Semiconductors and Signal Processing

They develop Analog Semiconductors, Digital Signal Processing, high performance signal processing solutions. Broadband Products, RF/IF Components, Embedded Processing and DSP.

Analog Devices - Semiconductors and Signal Processing

Products Include - Amplifiers, Processors, MEMS, A/D Converters, Temperature Sensors, RF Amplifiers, Differential Amplifiers, Thermal Management, D to A Converters, Microcontroller and Embedded Processing and DSP.

Circuit Note CN0147 - Powering a Fractional-N Voltage Controlled Oscillator (VCO) with Low Noise LDO Regulators for Reduced Phase Noise

Circuit Note CN0147 - Analog Devices

This circuit uses low noise, low dropout (LDO) linear regulators to supply power to a wideband integrated PLL and VCO. Wideband voltage controlled oscillators (VCOs) may have increased sensitivity to power supply noise, hence, ultralow noise regulators are recommended for best performance.

The evaluation board, which uses the ADP150 LDOs to power the ADF4350. The ADP150 represents the industry’s lowest noise LDO in the smallest package at the lowest cost.

Analog Devices, Inc
One Technology Way Norwood, MA 02062-9106, USA.



Friday, January 09, 2015

IMU - Accelerometers and Gyroscopes

The ADXL345 from Analog Devices is a small, thin, low power, 3-axis accelerometer with high resolution 13-bit measurement at up to ±16 g.

Ben's HobbyCorner - Software - Bascom-examples On the right the ADXL345, connected to the I2c-bus, and when connected well, you will find it in the I2c-scanner. This is the Bascom-AVR code for the I2c-scanner. When the ADXL345 and the HMC5843 are fixed on the board you should see this in Hyperterminal.

 Bascom-examples ADXL345 connected to the I2c-bus

A Guide to using IMU in Embedded Applications

This guide is intended to everyone interested in inertial MEMS (Micro-Electro-Mechanical Systems) sensors, in particular Accelerometers and Gyroscopes as well as combination IMU devices (Inertial Measurement Unit).

See also on this blog - Accelerometers in Electronics

Read More Here - IMU - Accelerometers and Gyroscopes

Thursday, January 06, 2011

Veeco - Metrology and Process Equipment

Metrology & Instrumentation, Process Equipment and Epitaxial Equipment. Advanced Research tools for life science, materials science and nanotechnology.

Veeco - Metrology and Process Equipment

Solutions for Process Equipment technologies primarily to manufacturers of high brightness light emitting diodes (LEDs) and solar cells. Supplies materials to hard disk drive (HDD) manufacturers for the production of thin film magnetic heads.

Molecular Beam Epitaxy (MBE) products which include systems and components. MBE has broad applications from power amplifiers to scientific research.

GENxplor MBE System  Veeco

GENxplor R&D MBE System

Veeco proudly introduces the GENxplor, the industry's first fully-integrated MBE system for the compound semiconductor R&D market.

Its efficient single frame design combines all vacuum hardware with on-board electronics to make it up to 40% smaller than other MBE systems, saving valuable lab space. Because the manual system is integrated on a single frame, installation time is reduced.

Veeco Instruments
1 Terminal Drive, Plainview, NY 11803, USA.

Tuesday, January 04, 2011

Numerical Innovations - CAD CAM for EE

They develop software tools which are of great interest to designers of PCB, Microwave/RF, MEMS, IC, chemically milled parts and optical components.

Numerical Innovations - CAD CAM for EE

"AutoGERB (world's first exporting of Gerber data directly from AutoCAD) and CAMtastic! (a CAM viewer which morphed into the first PCB DFM tool of its kind). They were the first in the industry to do some "cutting-edge" marketing by offering their products to be downloaded directly from the Web with a full 45 day trial.."

EasyGerb - Numerical Innovations

EasyGerb 4 is perfect for AutoCAD users looking for the easiest & most powerful way to output gerber files from their AutoCAD drawings.

Numerical Innovations, LLC. Division of Caneberra Technologies Inc.
1888 Kalakaua Ave, Suite #C312, Honolulu, Hawaii 96815, USA

MEMS Products from Axetris Leister

Micro-technology products and sevices. MEMS based ultra compact mass flow meters and controllers, modules and systems. MEMS based broadband infrared (IR) sources.

Diode-based laser gas detection (LGD) OEM modules. Micro Optics and MEMS Services.

MEMS Products from Axetris Leister

Mass Flow Devices - Mass Spectroscopy - MFC 2222

Mass Flow Devices - Mass Spectroscopy - MFC 2222

Small ultra compact mass flow controller module with RS-232 EIA and analog 0...5 V interface, based on the propertiarie Platinium MEMS technology from Axetris

MEMS and Nanotechnology Exchange

What is MEMS Technology?

"Micro-Electro-Mechanical Systems (MEMS) is the integration of mechanical elements, sensors, actuators, and electronics on a common silicon substrate through microfabrication technology.....

Axetris AG
Schwarzenbergstrasse 10 CH-6056 Kaegiswil / Switzerland

Monday, January 03, 2011

CMP - Circuits Multi-Projets

CMP is a broker in ICs and MEMS for prototyping and low volume production. Circuits are fabricated for Universities, Research Laboratories and Industrial Companies.

CMP - Circuits Multi-Projets

CMP offers a complete assembly service based on a wide range of ceramic and plastic packages for prototypes and low volume production.

CMP also supplies Design tools and kits like : Tanner Tools, Leonardo - ModelSim, ARM Tools, SoftMEMS Tools and more.

A 3-4GHz All-Digital PLL for Frequency Synthesis in 65nm CMOS



This chip contains a fractional-N PLL including a time/digital converter with calibration algorithms for fractional spur cancellation, a standard-cell-based digital filter and a low-noise voltage-controlled oscillator. It can synthesize frequencies from 3 to 4GHz with 600Hz resolution from a 40-MHz crystal reference, the loop bandwidth can be varied from 100kHz to 2MHz and it is intended for WiMAX transceivers.

Monday, November 08, 2010

Glew Engineering - Technology Expertise

Consulting Service for the semiconductor and microelectronic industry, FEA modeling, mechanical, electrical & materials engineering applications.
Glew Engineering - Technology Expertise
Experts in Electrical, Materials and Mechanical Engineering Consulting. Consulting and Support areas include Business Development, Solar & Flat Panel Technologies, Materials Science among many others.

CAD and finite element analysis (FEA)
FEA allows for comprehensive modeling of the chamber's integrity during testing conditions. The FEA model serves as a virtual experiment that allows reduction in prototype cost and testing. An accurate model can reduce the costly repercussions of an incorrectly designed system.
(They may cover Mems and Mechatronics too. - delabs)
Glew Engineering Consulting Inc. 240 Pamela Drive, Mountain View, CA 94040

Friday, May 14, 2010

COMSOL - Multiphysics Modeling Software

Developer of technical computing software. Software for simulation of real world multiphysics systems.

COMSOL Multiphysics is an engineering, design, and finite element analysis software environment for the modeling and simulation of any physics-based system.

COMSOL - Multiphysics Modeling Software

Photonic Crystal - COMSOL - Multiphysics Modeling Software

Photonic Crystal - Photonic crystal devices are periodic structures of alternating layers of materials with different refractive indices.

Modules for Structural Mechanics, Chemical Engineering, Plasma MEMS, Earth Science, Acoustics, and more.

Electrical Modules - AC/DC Module, Batteries & Fuel-Cells Module, Hi and Low Frequency Electromagnetics, Heat Transfer, RF Module.

Tuesday, August 11, 2009

Tanner EDA - Automate and Simplify Design

Tanner EDA - Automate and Simplify Design
 
High-technology design software for ICs, analog VLSI, and Design Automation. Includes Analog/Mixed-Signal ICs, ASICs and MEMS. Schematic Capture too.
  • Simulation: T-Spice, W-Edit
  • Physical Layout: L-Edit
  • Verification: HiPer Verify
  • Parasitic Layout Extraction
MEMS R&D and Prototyping Services - Fast Turn-around from Order to Product Prototype, Low and Medium Volume Fabrication

HiPer Verify
 
A comprehensive solution for analog/mixed-signal IC design rule checking DRC and hierarchical netlist extraction.

HiPer Verify - Tanner EDA

With HiPer Verify, you can simply reference the new DRC or LVS command file from the foundry, meeting your existing standards right out of the box.

Tanner Research
825 South Myrtle Avenue, Monrovia, CA 91016 USA