Showing posts with label PIC. Show all posts
Showing posts with label PIC. Show all posts

Friday, July 18, 2014

ASIX - Electronic Design Service

A private company located in Prague, the capital of the Czech Republic. They offer complete turnkey electronic design followed by a product manufacturing in any quantity.

ASIX - Electronic Design Service

They have a wide range of experience in electronics - programmable logic devices (Xilinx FPGAs and CPLDs), microcontrollers (PIC, AVR, ARM, ...), analog and digital electronics...etc.

They also manufacture some tools and instruments that are useful for R&D using Embedded Systems. These are like Programmers, Debugging Tools and USB Products.

Even their Discontinued products are very interesting...

PVK40 a feature-rich development board for 40-pin PIC

PVK40 for 40-pin PIC

The board includes all the circuitry necessary for an in-depth study of most of the microcontroller on-chip peripherals and for experimenting with several external peripherals. This board will help you to become an expert in PIC MCU programming.

ASIX s.r.o.
Staropramenna 4 150 00 Prague Czech Republic

Monday, January 14, 2013

Jens PIC and Z80 Projects

Jens PIC and Z80 Projects
PIC-Programmer 2 for PIC16C84
  • PIC16C84 Programmer
  • Z80 bootloader
  • 8751 ROM Monitor software
  • PIC16C84 Programmer
PIC-Programmer 2 for PIC16C84

Designs for VLSI
  • 8-transistor delay-insensitive memory cell
  • How to make PIC's with high clockspeed.
  • Analog low power converter


Wednesday, December 03, 2008

Open Programmer PIC and Atmel

An open source USB programmer for PIC micros, I2C EEPROMs, some ATMEL micros, generic I2C/SPI devices and (soon) other devices.

Open Programmer PIC and Atmel

  • Completely free and Open Source (including firmware)
  • Programs PIC10-12-16-18, 24xxxx I2C EEPROMs, some ATMEL micros, communicates with generic I2C & SPI devices (see supported devices)
  • USB interface, HID class (same as keyboards, mice, etc.)
  • Self powered
  • Doesn't need drivers
  • Built from easy to find components (estimated cost ~10€)
  • Hardware generated timings for maximum speed and reliability (writes a 18F2550 in 15s, 8s under Linux)
  • Doesn't saturate your CPU and doesn't suffer when other programs are running
  • Open source control programs for Linux and Windows
USBPicprog, another open source programmer