Showing posts with label Training-Consulting. Show all posts
Showing posts with label Training-Consulting. Show all posts

Tuesday, September 12, 2017

Kenneth Wyatt - EMC design and training services

A consulting firm that specializes in EMC design, troubleshooting and training services to commercial and industrial manufacturers with global distribution in the consumer, computer, network & telecommunications, industrial and scientific industries.

Kenneth Wyatt -  EMC design and training services

Kenneth Wyatt -  EMC design and training services

DIY 6 GHz comb generator by Kenneth Wyatt

Most simple DIY comb generators seem to run out of steam about 1 GHz. I recently ran into David Bowman’s 2.4 GHz circuit and measured an upper usable range of about 6 GHz. While greatly attenuated above 3 GHz, this circuit should still be valuable for measuring semi-anechoic chambers in the GHz ranges.

Wyatt Technical Services, LLC
56 Aspen Dr. Woodland Park, CO 80863, USA

Friday, February 05, 2016

Mechatronics a Montage of All Engineering

I once knew a dogbert, i will not name him. Yet his words resonated as true again and again. Once when someone asked him .. "Where the highest value can be created, in an engineered product?". He reveled a profound secret, that is only discussed in whispers in the backrooms of high-tech upstarts. I will attempt to phrase it in a more concise manner.

"When the raw materials transform into an Engineered product, the highest engineering value is both in the manufacturing process machinery and the manufactured product; If and only if, that product has mechanical, electrical, electronic and computing elements in its composition." - This was Mechatronics?

In essence it appeared to be a CNC machine, but not exactly, CNC too and much more. Robotics is a pinnacle of this collage. Then an Intelligent Embedded Control System with sensors, switches, tachos, drives and motor a part of Mechatronics. Looks like control engineering, a sub-section of mechatronics too. Control engineering is also an independent science. Can't leave out Intelligent machinery and Complex Gadgets.

Without chemical, component and materials engineering all the above cannot materialize. They create the inputs and technologies to the systems above.

Finally two examples for Mechatronic Marvels - One the Lone Martian called Rover (like Wall-E) and the Ultra Busy HardDisk HDD in your own Computer.

Mechatronics a Montage of All Engineering

Related Sciences

Systems Engineering - Managing and Integrating a Large Engineered System Solution. Includes Process, Project, Time, Work-flow, Co-ordination and Communication. (Means .. many Crimson Ties and a lot of Meetings ;-)

Mems - Micro, Electronic/Electrical, Mechanical Systems. Start Reading in detail about it, but never skip Lunch. -
  1. Mechatronics Tutorial Information
  2. Mechatronics - National Instruments
  3. Mechatronics Resources
  4. Mechatronic Tips
  5. Mechatronics - Sun Equipment Corporation
  6. Institute of Robotics and Mechatronics
  7. University of Wisconsin - Madison : Mechatronics Lab

Saturday, November 02, 2013

Erlich Industrial Development Corporation

High-end computerized lab equipment, accessories and sensors. They also manufacture OEM transducers, signal conditioners, industrial standards interface boards and kits. (USA Firm)

Erlich Industrial Development Corporation

Erlich Industrial Development Corporation (EID) is an OEM manufacturing and R&D Company specializing in the development of high technology biological, medical and chemical research products.

Adjustable Output Positive Voltage Power-Supply Kit

Interface board conductivity

An electronics board (kit) that allows you to connect up to 30V AC or DC on one side of the board and get adjustable VDC regulated on the other side. Every lab should have a few of these boards handy. The boards will allow you to easily power all your analog components (i.e. op-amp). The Terminal Block TB connector is included and makes it easy to use.

Interface board conductivity cell with DIN Rail clip

Interface board conductivity

Build your own Conductivity meter and/or controller and save. Simply connect your Conductivity cell (conductivity electrode, Probe) to the input via Terminal Board (TB) and the output to analog to digital converter (ADC), Digital voltmeter (DVM), Analog Voltmeter, micro-controller (MC) or PLC. Power the board and get reading.

Tuesday, October 01, 2013

ADInstruments - Data Acquisition and Analysis

ADInstruments was established in 1988 to deliver high quality, ease-of-use data acquisition systems for life science research and teaching.

ADInstruments - Data Acquisition and Analysis

Products include Data Acquisition Systems,  In Vitro & In Vivo Research Equipment, Blended Learning, Life Science Research Products.

"PowerLabs are USB DAQ devices. Simply set the PowerLab on your bench space, plug it in, and start using it with LabChart software. It's that easy!"

PowerLabs - Ddata Acquisition Hardware

PowerLabs - Ddata Acquisition Hardware

PowerLabs are capable of recording at speeds of up to 400,000 samples per second continuously to disk (aggregate), and are compatible with instruments, signal conditioners and transducers supplied by ADInstruments and many other leading brands.

ADInstruments
77 Vogel Street Dunedin, Otago 9016 New Zealand

Wednesday, May 01, 2013

Sun Equipment Corporation - Training Systems

Sun Equipment Corporation - Training Systems

Kits and Custom Equipment Developer/Provider for Training and Industry, Engineering design and Development Lab Support.

Digital Signal Processing Control Lab

Digital Signal Processing Control Lab: DSP-59000

Dual processors (TMS-320C5416 & TMS-320LF2407). Built-in audio/video, MP3, Ethernet, Keypad, RS-232/RS-485, temperature control, function generator, PWM , experiment modules

ispPAC20 Programmable Analog IC Development Lab

Design, simulate, program, print, check and verify ispPAC-20 IC programs through the printer port

ispPAC20 Programmable Analog IC Development Lab

Built-in modules include input bias, microphone, amplifier, decay, adder, substractor, integration, filter, band width control, bridge and temperature sensor, VCO, PWM, Delta-Sigma modulation, D/A converter, widow comparator, absolute-value circuit, Voltage monitor, temperature monitor, light measurement, current transmit interface, feedback control of voltage and current, analog multiplexer, SPI control and etc.

Sun Equipment Corporation
1352 S. Grove Ave., Suite A, Ontario, CA 91761, USA.

Sunday, April 01, 2012

Quanser - Control Design Solutions

They design and manufacture advanced systems for real-time control design and implementation used in education, research and industry.

Quanser - Control Design Solutions

They demonstrate the state of the art for control systems plants for the most demanding applications in control, mechatronics, robotics, etc. Used both in Advanced Education and Research Labs.

Manufacturers of robotic and mechatronic systems including high quality haptic devices. Advanced systems for real-time control design and implementation.

Each device in the Mechatronic Controls Collection is suitable for teaching and research. These robust systems are ideal for teaching fundamentals and advanced enough for complex research.

QNET Mechatronic Sensors Trainer

QNET Mechatronic Sensors Trainer

The QNET Mechatronic Sensors (MECHKIT) Trainer is ideally suited to teach and demonstrate the fundamentals of interfacing with mechatronic sensors.

Active Suspension system

This Active Suspension system consists of three masses, or plates. Each mass slides along stainless steel shafts using linear bearings and is supported by a set of springs.

The Active Suspension comes with the Quanser-developed courseware. A comprehensive Laboratory Guide, together with quick start resources....

Quanser
119 Spy Court Markham, Ontario, L3R 5H6 Canada.

Saturday, June 04, 2011

Equipment Design and Development Tools - LabSmith

"LabSmith was founded in 1995 by Dr. Eric Cummings, whose work at Caltech and other institutions exposed the need for a new approach to research equipment design."

Equipment Design and Development Tools - LabSmith 

"LabSmith has introduced entirely new classes of equipment, such as high voltage sequencers, real-time recording fluorescence microscopes, uProcess Aautomation products, including syringe pumps and valves, and breadboard-based microfluidics components."

Microfluidics with the LabSmith LabPackage-Making a Microfluidic Injection on a Chip

Microfluidics with the LabSmith

"Breadboard-based connections and components for capillary and tubing-based microfluidic setups."

"From snap-together microfluidics to affordable, feature-laden microscopes, LabSmith has earned its reputation for innovative solutions to research problems."

LabSmith,
6111 Southfront Road, Suite E· Livermore, CA 94551

Thursday, October 07, 2010

Vault Information Services LLC

Embedded/8051 Consulting - VIS offers embedded consulting, particularly with 8051 microcontrollers. We can design your hardware and/or develop software for hardware you've already designed. Give us the details of your project and we will provide you with an estimate for the development.

Vault Information Services LLC

In October 1985, VIS founder Craig Steiner started a Bulletin Board System (BBS) in Denver, Colorado called "The Vault." This BBS was operated using an Atari 8-bit computer and was an important and innovative system in the Denver BBS scene at the time--especially in the Atari sector. Many features and additions were made throughout the life of the Atari-version of the BBS that kept The Vault on the cutting edge in Denver.

Monday, July 06, 2009

ISQED - Design and Design Automation

ISQED - Design and Design Automation
"ISQED is the pioneer and leading conference dealing with design for manufacturability and quality issues, front to back."
Targetted Audience - Researchers, Developers, and Users of EDA/TCAD Tools & Design Flows and Methodologies

Friday, September 05, 2008

Eng-Tips Forums - Electrical and Electronic

Eng-Tips Forums - Electrical and Electronic

These pages will probably help you do a design review of your new circuit or even answer a doubt in your product design. Use the Search.

  • Electrical/Electronic engineering other topics
  • Programmable Logic Controllers (PLC)
  • Communication & Signal Processing engineering

Thursday, July 17, 2008

uCpros - MicroController Pros

uCpros - MicroController Pros

Embedded System Design, Microcontroller Development Tools, Management & Marketing, Training, Technical Writing and Translation Services

Training
MiicroController Pros develops and conducts corporate training courses. We offer customization of training programs to meet your specific microcontroller software and hardware development training needs.

Technical Writing
MicroController Pros is your technical writing resource. We perform contract technical writing services, like: report writing; specification writing; and technical writing of manuals, datasheets, application notes and product articles.

Wednesday, July 16, 2008

Netrino - Embedded Experts

Netrino - Embedded Experts

Netrino's specialty is the design and development of products with computers embedded inside them. Each member of our team of senior engineers has specific skills and expertise such as mechanical engineering, electrical engineering, and/or embedded software development.

Embedded Systems Glossary. The glossary is sorted alphabetically, with one page for each letter and another for terms that start with numbers or symbols. The maintainer of the glossary is a founder of Netrino and co-author of the book Embedded Systems Dictionary. - Michael Barr

The Articles section of our library contains most of our published magazine and journal articles, conference papers, and many other short technical pieces relevant to the practice of real-time embedded systems design.

Tuesday, February 12, 2008

Douglas Beattie Engineering Consultant

Douglas Beattie Engineering Consultant

  • 6502 / 65C02: Hardware / Software
  • eZ80F91 Reference Design
  • Parallel Port Interfacing (''roll-your-own'')
  • Z80 Forth page

Tuesday, October 02, 2007

Integrated Publishing - Electronics Training

Integrated Publishing - Electronics Training

Your source for manuals, engineering reference manuals, and all training material.

  • Antenna and Masts - operation manuals for Antennas and Masts.
  • Electronic Calibrators - operation manuals for Electronic Calibrators
  • Inverters - operation manuals for Inverter equipment
  • Oscilloscopes - operation manuals for Oscilloscopes equipment
  • Power Supplies - operation manuals for Power Supply equipment